How to Paint a Computer Case

There is just no better way to make your PCs and laptops more fashionable than ever than to paint its case with the latest art trends today. If you want to see your computer cases look new again, you can always paint them with your favorite color or style. If you are afraid to stain or ruin anything inside, you definitely have nothing to worry about. Here are very simple steps on how you can paint your computer case with the almost anything you like.

First of all, you will need some tools and materials in order to get this tedious job done. No need to worry about the cost of this project, as you can finish it without hurting your pockets-that is definitely for sure. You do not even have to buy for the tools that you are going to use, because all of these will most probably be available in your garage storage. Some of the most important tools you will need will be a screwdriver for removing all the components in your case, denatured alcohol for finishing the sandy texture of the case once paint has been removed, cotton rag to keep your work area clean, spray cans and enamel to paint your case, wet sanding paper to remove the old paint, and old newspapers and cartons to prevent the paint from spilling everywhere. Before starting anything, it is also recommended that you choose the best-quality automotive paint that will give instant shine and beauty back to your computer cases again. The enamel is also needed in order to serve as the polishing part of the job, thus giving your computer a complete feel of being new again.

Step 1: Shutdown PC

Kind of obvious really, but you will be surprised! Make sure that you have properly shut down your computer units. Unplug the main outlet. You also want to remove all the cables and wires that are connected to the case, including the main power cord, the LAN cable, and the monitor cable. Note that the PC has to cool down before you want to touch anything inside the case. This usually takes 10-15 minutes. While you are waiting for your case to cool down, you may want to prepare all the necessary materials in order to get this job started.

Step 2: Choose your Spot

Choose a work area that is properly ventilated. Allow enough air and sunlight to aid in fast drying of the paint and also to help you breathe easier. Remember that paint can be a toxic substance in the absence of sufficient oxygen in the body. Cover the floor or table with the old cartons or newspapers, and be sure that the case will be properly positioned in your work area. There must be no bulges or uneven surfaces where it is mounted, or you will not be able to finely paint all of its edges and surfaces.

Step 3: Unscrew your Case

Before proceeding to this step, make sure that you have prepared the corresponding boxes and containers of all the components inside your CPU. Do not let them scatter everywhere especially while you are working on the paint-making a case look new is entirely useless if your computer would be unusable in return. Locate the panels, clips and screws on your computer case. Using a screwdriver, carefully remove the casing. Place all the components and parts in a safe, dry and clean container and set them aside for the entire painting job.

Step 4: Clean and Smoothen

This is the second hardest part of this task, with paint removal being the top in the list. As with any other kind of painting job, you need to clean the surfaces and make sure that they are free from any lump or bulge that will ruin the appearance of the new paint in the casing. Surely, the last thing that you would want to see is uneven surfaces in your new casing. Carefully clean the case, making sure that you have not missed out a single edge or that you will be applying paint on. Remove all the stickers and labels inside the casing.

Step 5: Say Goodbye to your Old Paint

This is the most tedious part of the job, where you have to be very careful not to damage the casing itself in removing the outer paint. Use 220-grit sandpaper in removing all the paint and color in your casing. Get rid of all the existing paint and sand down all of the surfaces of the casing. Use the sandpaper to smoothen the edges that are still coated with paint. As much as possible, you may use only one direction in sanding down your casing. This will make a perfect finish and excellent paint touches.

Step 6: Removing Debris

You may now clean and remove all the debris and particles that were left during the previous step. Pour sufficient amount of denatured alcohol into a cotton rag and carefully wipe of the excess materials in the sanded surface. Be sure to dry the case first before you can proceed to the next step.

Step 7: The Very First Coat

After drying the surface of the casing, you may now spray a very thin coat of paint on it. Hold the spray can at the proper level and angle in order to spray the paint perfectly. You might want to keep a distance of 8-12 inches from the casing. A thin and even painting stroke would not be possible without a steady hand, so be sure to hold the spray can as tight and steady as possible. Also, if you come too close, you are more likely to end up with uneven sprays, if you come too far, you might scatter the paint even to the unwanted parts of the casing. Be sure not to leave out the edges and corners of the casing. Allow the first coat to dry. You may also check the back of the spray cans for instructions on the drying time of the paint.

Step 8: The Final Touch

Lightly wet the primer coat with sandpaper, and allow it to dry. A second coat may be applied after this, after which let it dry before you can finally reassemble your computer.

Extra steps can be undertaken during the procedure. Some paints work better with a primer (undercoat) and some work better with a clear coat. You may want to speak to your paint supplier as to what paints may require the extra steps.

Do not be afraid to try something different! Airbrushing, flip paint and heat changing paint can dramatically enhance the painted effect. We have!

Good luck, hopefully you will have your gaming computer now looking the part as well as doing the part!

Author: Daman Curtis
Article Source: EzineArticles.com
Provided by: Duty tariff

• Telephone Plug Adapters There are no worldwide standard for telephone jacks. The North American RJ-11 pattern is used in over 100 countries through-out the world and if you are traveling to China, Greece or Vietnam, you will have no trouble plugging in your laptop modem, where-as, you will find that plugging-in is......
• 6 Steps to Successful Telecommuting Advances in telecommunication and IP technologies has enabled millions of Americans to free themselves from the office environment and become what is now commonly known as "telecommuters".The 1990s saw a rise in the popularity of telecommuting and there seems to be no end in sight. The International Telework Association......
• Clean in Place - A Technology That Has Brought Relief to Many Industries Any production process requires heavy machinery and huge equipments. These equipments are required for a very long period and need to be maintained properly so that their life span is long. The more maintenance and upkeep invested in the machines, longer shall be the life of the machine and......
• Toll Fraud Security and DISA Most businesses Telephone Systems have a feature called Direct Inward System Access or DISA for short. This feature allows authorized users to dial a special number into your telephone system and then either dial extension numbers directly or outside numbers utilizing your companys less expensive long distance trunks and......
• Diagnosing And Troubleshooting Computer Hardware What is Hardware?Are these terms familiar to you? Monitor, RAM, CD drive, CPU, graphic cards are all hardware, or more accurately, computer hardware. These components make up a computer, working together with computer software to make a computer work.Simply put, hardware is the tangible parts of your computer, parts you......

• Bathroom Redo: Painting Ceramic Tile Painting ceramic tile is an excellent way to update a bathroom. Older bathrooms especially may have outdated colors and patterns on the walls, but on ceramic tile that's still in good shape. The idea of removing all that tile and starting with a clean slate can quickly make you decide......
• 5 Things You Need to Know Before Hiring A Contractor There are times when even the best of us may not have the qualifications needed to fix something around the house. Every year, there are thousands of disaster stories where homeowners thought they could do the job on their own, only to end up causing costly damage to their property.......
• Job Interview Basics Yesterday, we discussed some of the basics for job hunting, a process most of us will have to go through at one point or another in our lives.  With these hints, plenty of solid job searching, and maybe just a little bit of luck, you should find yourself facing the......
• What is wrong with taking a second job? Not a single thing. The thought that a fully-employed person should feel bad for taking another job for additional income is absolutely preposterous.  This discussion over at Get Rich Slowly was prompted by this question from one of his readers: As someone who is still fortunate to be employed, is......
• Free Software To Soup Up The Home Computer This post was contributed by Courtney Phillips, who writes about how to obtain a degree in accounting. She welcomes your feedback at CourtneyPhillips80 at gmail.com These days, we need to pinch pennies everywhere we can.  And, because we've all had to get creative about where and how we work, your......

Related posts:

1. Tuning-Up Windows XP Computer
2. How to Install a Wireless Modem in a Desktop Computer
3. 5 Desktop Computer Hardware Myths Exposed
4. Intellectual Property Ground Breaking Decision Patents Business Methods Computer Programs
5. Computer Repair in Washington DC